22-4 2.0 RACE KIT: 1/10 4WD BUGGY

CHASSIS CALL-OUT

LIGHTWEIGHT 2.5MM HARD-ANODIZED 7075 T-6 ALUMINUM CHASSIS

SEALED, 3-BELT DRIVELINE WITH SPLIT SIDE/REAR BELT COVERS FOR EASY MAINTENANCE

OIL-FILLED GEAR DIFFERENTIALS

FRONT AND REAR CVAS

VERTICAL-MOUNT, REAR CAMBER BLOCK

VERSATILE BATTERY MOUNT FOR MULTIPLE CONFIGURATIONS

12.5° ALUMINUM CASTER BLOCKS

2.5°REAR TOE PLATE

GEN II 12MM BIG BORE SHOCKS WITH MACHINED SHOCK INTERNALS

PINK REAR SWAY BAR

FORWARD MOTOR LOCATION

FULL-TIME 4WD PULLEY

NEW FRONT STEEL PIVOT BRACE DESIGN

FEATURES

GEAR DIFFERENTIALS

The all-new, low maintenance gear differentials are designed narrow, so there is no need to compromise the inner pivot or roll center widths. Besides providing improved performance on all types of surfaces, the gear diffs can be accurately tuned using diff fluid. Their cases are machined from 7075-T6 aluminum but weigh similarly to stock ball diffs

GEAR DIFFERENTIALS

OPTIMIZED SUSPENSION GEOMETRY

Converting to the 22™ off-set, rear-hub geometry has widened the rear track width, creating more stability in the rear end so racers can push the car harder with confidence. The 22 rear hub is paired with a vertical-mount, rear-camber block. This provides multiple adjustments that allow the rear roll center to be optimized for any conditions.

OPTIMIZED SUSPENSION GEOMETRY

MULTIPLE BATTERY CONFIGURATIONS

The chassis and mud guard are designed to accommodate a variety of battery configurations. A shorty pack can be mounted forward or backward on the left side of the chassis using the molded locator. Saddle packs can be mounted with half on each side of the chassis. When using a saddle pack, the left side can be moved fore or aft to adjust weight bias.

MULTIPLE BATTERY CONFIGURATIONS

POPULAR TUNING PARTS INCLUDED

The kit comes standard with 12.5˚ aluminum caster blocks, a 2.5˚rear toe plate, a pink rear sway bar, a vertical-ball stud rear camber block, front and rear CVAs and a cab-forward body. These parts maximize the buggy’s performance by improving stability, balance and adjustability.

POPULAR TUNING PARTS INCLUDED

SPLIT BELT COVERS

The center and rear belt cover are now split and to not interlock. Now you can remove the center belt cover by removing only the front cover, and the rear belt cover will remain untouched.p>

SPLIT BELT COVERS

CVA DRIVESHAFTS

This popular tuning option for the original 22-4 buggy is now included with the 2.0. The CVAs lock up under acceleration and keep the car flatter, especially during hard acceleration.

CVA DRIVESHAFTS

LIGHTWEIGHT 2.5MM 7075-T6 ALUMINUM CHASSIS

The aluminum main chassis plate has been CNC machined for optimal fit and flex. Milled pockets in the chassis reduce weight, including an open pocket under the motor that reduces temps.

LIGHTWEIGHT 2.5MM 7075-T6 ALUMINUM CHASSIS

CENTRALIZED FORWARD MOTOR PLACEMENT

The aluminum chassis has been CNC machined from 2.5mm 7075-T6 aluminum. Carefully designed, the milled pockets in the chassis are strategically located to reduce weight and maintain proper flex through the chassis.

CENTRALIZED FORWARD MOTOR PLACEMENT

PRODUCT SPECIFICATIONS

Type:

Race Kit

Scale:

1/10

Length:

16.5 In (419.1mm)

Width:

9.41 In (239.0mm)

Height:

6.50 In (165.1mm)

Ground Clearance:

Adjustable

Wheelbase:

11.10 In (282.3mm)

Weight:

Varies With Equipment

Chassis:

2.5mm Plate, 7075-T6

Suspension:

Four Wheel Independent

Drivetrain:

4WD

Motor or Engine:

Not Included

Speed Control:

Not Included

Radio:

Not Included

Servos:

Not Included

Batteries:

Not Included

Charger:

Not Included

Gear Pitch:

48-Pitch

Wheel Size:

2.2" (55.9mm)

Kit/RTR:

Kit

Shock Type:

Coilover, Oil Filled

Body:

1.0mm Polycarbonate, Clear

Ball Bearings:

Full

Experience Level:

Advanced

Recommended Environment:

Indoor/Outdoor

Assembly Time:

3-5 Hours

Is Assembly Required:

Yes

NEEDED TO COMPLETE

Motor

Electronic Speed Control

Servo

Tires

Radio System

Pinion Gear

Charger

Battery